Tag Archives: v-berth filler


Create a comfortable double bed in your v-berth by adding a keystone filler cushion. This small, irregularly shaped cushion may look tricky to make, but we’re going to break down the steps for you to make it easy to pattern and sew. If you need to make all new cushions for your v-berth, check out our post on how to make V-berth cushions.

The keystone cushion we made for our Islanders 37 sailboat is a trapezoid shape, which is pretty common, but yours might be a different shape depending on your boat’s v-berth configuration. Our keystone cushion sits in its own tray with trim board between it and the main v-berth cushion. If you have a similar set-up, you’ll want to add extra width to the top of your foam so the filler cushion will be flush with the main cushions. To do this, measure the width of the filler board and add that width to the top of the foam width measurement. The end result will be a cushion with an angled edge.

The key to making a great fitting keystone cushion is careful patterning and attention to detail. In the video, we break down the patterning steps slowly with calculations so you can get the best fit possible for your filler cushion. When patterning your fabric, be sure to take into consideration any designs on the fabric. You’ll see we were careful to match up the stripes on the fabric with the existing v-berth cushions for a cleaner look.

For the full video and materials list, visit and search #200647XHT.


Find all the materials needed to make your own full set of v-berth cushions at

Do you have a filler cushion in your v-berth? Have you ever re-covered it? Share your tips and advice with us in the comments!

%d bloggers like this: