Weather can be a fickle friend and with all the variations of cloudy, partly cloudy, and scorching hot sunny days, sometimes you need a variety of weapons to keep your boat’s cabin perfectly cool and well-lit. For the hottest days, you can cover the outside of your hatch with a Sunbrella Hatch Cover that will block all the light and protect the glass. But for those in-between days, why not use a lighter cover that will help shade your cabin while still letting a little light flow in? Today we’re going to show you how to do just that by making an Inside Hatch Cover.
Using an inside hatch cover allows you the freedom to attach or remove the cover from inside your cabin. Our inside hatch cover is made with Phifertex Mesh which has an open weave that allows air to pass through and has about a 70% shade factor. If you wanted more shade, you could use Phifertex Plus or Sunbrella Sling fabrics, which have a 90-95% shade factor.
We attached our hatch cover using YKK SNADs. These adhesive backed snap studs are great for this project because they adhere really well to surfaces and they don’t require you to drill a hole.
This project is simple to sew and great for beginners. In this video, you will learn how to pattern, sew and install an inside hatch cover.
- • Fabric (we used Phifertex Mesh Sand)
- • V-92 Polyester Thread
- • YKK SNAD 25 mm Clear Flexible Base Stud
- • Snap Fastener Buttons (we used the SnapRite Buttons)
- • Snap Fastener Sockets
Find a great selection of mesh materials along with all of the other materials needed to complete this project at www.sailrite.com.
Do you have covers for your hatches? What style are they? Share your experiences and ideas in the comments!